Work Results: Buying Stainless Steel and Making a Simple Pipe Bend with Perfect Results

---

---

Buying Stainless Steel and Making a Simple Pipe Bend with Perfect Results

---

Today, I will show you again, in between payments in working on making fences and canopies, I also bought some stainless steel equipment, to try to make a simple bending tool with Used Wheels. during my free time, with a strong clamping vise, I clamped these two used wheels with the available fasteners.

Initially I made this tool just to try it out, but after doing some initial welding, to connect the two used fence wheels, the iron began to bend with a perfect curve. and the first result I got was like the picture below:

---

---

because I want to make a minimalist table that is trending on social media and has good results so that it is not damaged, due to expensive stainless steel, as stated on the Invoice, then, I did another repair on some of the lava handles firmly including welding. so that it does not come off or come off later when doing the bending.

after a while of making repairs, then, the hand began to turn the hand handle slowly and finally the round pipe that was 200cm long, circled perfectly, and I got the results as in the picture below:

---

---

and steem users can notice that, the round iron Stainlis has become circular, and it turns out, the adjustment of the length of 200cm will make the circle a different size. and the results of this will certainly produce more real results in my desire to make Minimalist tables made of stainless steel without paint and painted iron to support the cost of opening the Main Business that I wrote in the previous post.

---

Pipe Bending Process

---

---

For steem users and the steem community who want to learn how to make this pipe bending tool to practice making your creative things at home, don't hesitate, below, I have made a glimpse of how to make a very simple pipe bending tool with simple tools:

• Iron Vise
• Used Double Wheel 1 piece
• Single Wheel 1 piece

How to:

• use a vise and put the whole thing together as in picture No.1

• clamp the pipe and the two wheels side by side and in the same direction first, after straight, insert the stainless pipe, and tie it slowly using the handle available on the vise handle. do it slowly while relaxing. pay attention to the blue arrow No.2

• after all have been tied together between the lava, iron and vise, turn the vise handle slowly, and hold the stainless steel pipe so that it does not come off or come loose, pay attention to picture No.3

well, that's the process, hopefully steemit.com users and users in the steem community can do it at home, to get circular round iron for their respective needs at home, hopefully useful.

---

Purchase Invoice

---

---

this is what I can convey in making work support equipment if you want to make creative equipment to bend pipes with unused fence lava, rather than unused or discarded lava, we can use it to round pipes or iron.

hopefully useful, I end with good luck with your activities.

Best regards Creative Greetings
@sultan-aceh

---

---

---

---

---

---

"Anda Penguna STEEM yang ingin mempromosikan blockchain Steem dan Steemit dengan tujuan menarik investor untuk mengeksplorasi peluang yang ditawarkannya. Jangan ragu untuk menggunakan video ini dan membagikan video tersebut di platform media sosial lainnya."

---

---