Van de Graff Generator

---

   In 1929, Robert J. Van de Graaff designed an electrostatic machine which produces large electrostatic potential difference of the order of 107 V.

---

![ Van de Graff Generator ]()

Image courtesy : @lokeshlgl

---

### Principle The working of Van de Graaff generator is based on the principle of electrostatic induction and action of points.

---

### Design A hollow metallic sphere A is mounted on insulating pillar.pulley B is mounted at the centre of the sphere and another pulley C is mounted near the bottom. A belt made of silk moves over the pulleys. The pulley C is driven continuously by an electric motor. Two comb−shaped conductors D and E having number of needles, are mounted near the pulleys. The comb D is maintained at a positive potential of the order of 104 volt by a power supply. The upper comb E is connected to the inner side of the hollow metal sphere. of the high electric field near the comb D, the air gets ionised due to action of points, the negative charges in air move towards the needles and positive charges are repelled on towards the belt. These positive charges stick to the belt, moves up and reaches near the comb E.

---

As a result of electrostatic induction, the comb E acquires negative charge and the sphere acquires positive charge. The acquired positive charge is distributed on the outer surface of the sphere. The high electric field at the comb E ionises the air. Hence, negative charges are repelled to the belt, neutralises the positive charge on the belt before the belt passes over the pulley. Hence the descending belt will be left uncharged.

---

### Result Thus the machine, continuously transfers the positive charge to the sphere. As a result, the potential of the sphere keeps increasing till it attains a limiting value (maximum). After this stage no more charge.

---

**Thanks for reading**

       #steemeducation is the goal.I will achieve it.☺