SEC S20W4//Transformation of ladies pattern of blouse

I am explaining here a step-by-step transformation applying to a pattern by the use of "Dart and Slash" cutting model.

• First of all I identified waistline, shoulder slope, and armhole for making a pattern.
• After that I have created a dart by folding and pinning excess fabric at waist level.
• After that I slashed a dart by cutting along fold which creates a seamless joint.
• Make smooth and aligned edges and cut the pattern parts according for verification of pattern.

• This is final look I have made by cutting this pattern and by making adjustments according to requirement.

Now I am making a pattern of Raglan sleeve.

• First of all draft armhole will be needed by drawing curved line from shoulder towards underarms.

• Then for creation of sleeve cap you need to draw an arc from armhole towards neckline.

• Next step is merging of sleeve and body by extending sleeve cap to body for elimination of seam.

• At last you need verification of grain lines and seam alignment.After that I finalize my pattern by making a drawing by making different adjustments.

For making patten of sleeve these pieces are majorly required!

• Front piece.
• Back piece.
• Sleeve piece which is integrated with body.

I have used following body measurements!

1. Bust circumference which is 38 inches and it's 96.5 in cm.
2. Waist with 30 inches which is around 76.2 in cm.
3. Hip with 40 inches which is 101.6 in cm.
4. Shoulder slope made with around 2.5 inches which is 6.4 in cm.
5. Armhole depth is with 8 inches which is almost 20.3 in cm.
6. Sleeve length is with 24 inches which is 61 in cm.

Now if I talk about overall pattern measurements then I take all these measurements

• Front length of around 26 inches which are 66 cm.
• Back length of around 28 inches which are 71.1 cm.
• Shoulder width of around 14 inches which are 35.6 cm.
• Armhole curve of around 10 inches which are 25.4 cm.
• Sleeve cap height of around 6 inches which are 15.2 cm.
• Sleeve width of almost 12 inches which are 30.5 cm.

Raglan sleeve measurements

• Raglan angle of almost around 30 degrees
• Sleeve cap arc of almost 12 inches and 30.5 cm.
• Armhole curve radius of around 4 inches and 10.2 cm.

My invitation for
@mile16
@kouba01
@heriadi
@pandora2010
@artist1111