Salt Power Plant

By using galvanized batteries, brine containing sodium chloride will be ionized into positive ions namely sodium and negative ions are chloride. And become a source of energy that can generate electricity like a flame of light in the experiments it does, with a long time.

The first experiment was to use a salt water with 200 ml volume and the result is a lamp can be lit for about 8 hours. However, after 8 hours, the battery must be replaced with a new one because it can not generate electricity within 6 months.

Testing the effectiveness of this new energy source you can do in an easy way.
Here are the steps :
1 . Prepare all necessary equipment ie, glass, salt water, kebel, batteries, cables, and lights.

2 . Then, put the water of the salt solution into the glass

3 . Followed by inserting the battery and connect the cable that has been connected to the lamp, through positive pole and negative pole.

4 . If the lights can be lit means your work process has been successful

Those are some explanations I can share on how to create a new source of electrical energy using cheap and very easy materials you get by using a brine solution.

After I did the research, I started using the salt water power plant to light 600 lights a day.

I share this information. hopefully can be a new reference for you.
Thanks you..