How to make a kite

Materials needed:

1 thin bamboo strip with a width of approximately 1 cm and a length of approximately 60-80 cm, depending on the length of the kite will be made.1 thin bamboo strips with a width of approximately 1 cm and a length of approximately 40-50 cm, depending on the width of the kite want to make. Oil paper of the same size that would be enough with the size of bamboo.Spidol.Gunting.Meteran.Isolasi.Pita rolls thick.Benang or thin strap.

How to Make:

Place the two bamboo blades in a crossed position, ie with the intersection of the 1/3 of the longest bamboo.Ikatkan both objects with a thin thread or rope.Ikat and hook to the four ends of the bamboo was wearing rope or yarn to frame a kite-shaped diamonds like a kite form in general. If the frame is finished, then place the frame on the oil paper. Make a mark on the paper with a marker following the pattern of the kite frame. Please be more secure, give the distance approximately 2, 5 cm from the size original. Cut the paper by using scissors in accordance with the same line that already made. If already, paste the paper into the frame using isolation. Do not forget, the width of the rest of the paper behind it first until it is isolated ie the back side.If required, newspaper or ribbon can be used to be tailed. Not only to beautify it, it also plays a kite-balancing role when it is flown.Create a hole in the center of the kite (next to the bamboo frameholder) and insert the kite thread into the hole then tie it to the crossword frame.Create the hole below the center point of approximately 5-8 cm, depending on the size of the kite.Tautkan thread from the midpoint to the hole beneath it.