Part of the educational electronic work: I have fixed the bicycle electric horn of the office colleague.

in Electronics Academy13 days ago

Steemian Friends,
Today, I will show you how to fix the electronic horn of a bicycle. An operator of my office comes to the office on a bicycle. Suddenly, the electronic horn of his bicycle broke. The horn was brought to me after I came to the office. I would like to know the problem of electronic horn first. The electronic horn suddenly beeps without the switch but cannot be turned on or off with the switch. I have written the step-by-step procedure for fixing the electronic horn below. I hope you can easily do electronic work like me.

Easy way to do electronic work.png
Design By Canva

I first opened the electronic horn with a tester. It was attached with four small screws. Then, I see an electronic circuit board inside the horn. I first look at the components in the electronic circuit. The diodes, capacitors or other components on the electronic circuit board were not damaged. Then I press the electronic switch. Then the horn sometimes sounds, and sometimes it doesn't. Then I found some fault.

IMG20250209110217.jpg

IMG20250209110231.jpg

IMG20250209111714.jpg
First, open the circuit board of the electronic horn

Then, I clean each component of the circuit board with an electronic contact cleaner, and I am sure the circuit board is good. Then, I thoroughly clean each circuit board component with contact cleaner. At first, I thought the electronic switch was faulty, but sometimes, the horn sounds when the electronic switch is pressed. I sometimes take a good look at the entire circuit board.

IMG20250209111815.jpg

IMG20250209111725.jpg

IMG20250209112255.jpg

IMG20250209112251.jpg

Then, take out the fault of the electronic horn step by step

Then, I found the main fault of the electronic horn. Suddenly, I got a fault in the cable coming out of the circuit switch. The cable has thin wires cut inside. Sometimes, the horn sounds when the cable is connected, and the horn does not sound when disconnected. I cut the bad part of the cable. Then, I connected a new little cable to the circuit. Then, the electronic horn started working properly. My office operator is very happy that the bicycle horn is fixed.

IMG20250209115043.jpg

IMG20250209115105.jpg

IMG20250209112654.jpg
Finding the fault and solving it

I have shown my Steemian friends a simple technique for doing electronic work through today's post. We can do any electronic work at home ourselves if we want. Electronic work requires mental energy. You have to open the circuit yourself with the electronic equipment. You can easily fix home appliances with your own intelligence and knowledge.

IMG20250209113345.jpg

IMG20250209111940.jpg

After fixing the electronic horn and attaching it to the bicycle

Blue line.png

Steemit.com.png

image.png