Greetings to you friends, today I will show you step by step on how to cut and sew this you dress

measurement

shoulder	18
shoulder bust	11
shoulder under bust	14
bust	43
half length	17
half length waist	33
gown hip point	27
gown knee length	38
hip	46
gown length	60

I folded the fabric into two then I marked her gown hip point, gown knee length and gown length then I add 2 inchies for the length then I marked her half length waist measurement her half length waist measurement is 33 so I divide the 33 by 4 then I add 2 inchies allowance then I marked her hip measurement her hip measurement is 43 so I divide it by 4 and Marked it then I add 2 inchies for allowance then I minus 5 from the hip measurement and have the gown knee length measurement then I minus 2 inches from the measurement and have the edges then I cut it out after that I lay b
the material again then I place the front on top of the material then I may zip allowance 2inchies then I marked it from the waist to the down part then I cut it straight .then I cut a linning the cut the lease then I turn it to the possible side then I hold the dart the dart length is 8 inches so I hold the dart front and back then I iron it and take her measurement after talking her measurement this is how it look

the back

I folded bthe material into four then I places the front on top of the material then I put a zip then I use a guming to neatened the slide then I then I iron it and put a zip as you can see in the picture below

the upper side

I folded the material into four then I marked her shoulder shoulder bust shoulder under bust bust to bust then I marked 5 inches and mark 3 inches then I marked her dart 4 inches from shoulder to half length then I connect them together then I cut it out the next thing to do is to join the bust and bust together then I took her bust measurement, shoulder bust, shoulder under bust, half length waist.then I cut a linning and turn the lining in a possitve then I iron it then I fixed it with the down part as you can see in the picture below

the design

I cut it in flare from then I use a linning and neated then I edges of the material then I join it to the dress and it makes the dress to be more beautiful as you can see in the picture below

the selves

I folded the lease material into two the I marked her selves length then i marked her first round selves then I took her section round selves then I connect them together and cut it out then I take her full measurement then I then I fixed it on the dress as you can see in the picture below

Then I iron it and put a zip at the back,this is the finished result

Thanks everyone for going through my post