A simple DIY
Hi steemians. Today im gonna show you some simple Do-It-Yourselft. Maybe some of you out there already knew but im just gonna post it anyway! :D
This is my homemade brake bleeder. Things you need to list :-
- Used plastic bottle (at least find the hard material like mine on the picture "Mountain Dew" bottle)
- A transparent hose i.e. 3-4ft depents on individual or car(to make sure you see all the brake fluid goes through the hose and to the bottle)
- Nail small one/lighter
All you need to do is punched a hole on the bottle cap using the nail. Use the lighter to aid the nail through that cap. Make sure you punched the hole on the outside of the cap. Not too big just to ensure the hose fit enough to slide in the cap. After that you can cut the hose on your own length. Fill the bottle using clean brake fluid and Voila! You've done it! Your own homemade Brake Bleeder! Cheers :D
@originalworks
The @OriginalWorks bot has determined this post by @feyrdauze88 to be original material and upvoted(1.5%) it!
To call @OriginalWorks, simply reply to any post with @originalworks or !originalworks in your message!