CARBURATOR FUNCTIONS AND WORKING METHODS

The carburetor is part of the engine that is in charge of the filling system (fuel infusion into the cylinder). For that function of the carburetor, among others:
To regulate air and fuel into the suction channel.
To adjust the air-fuel ratio at various motor speed loads.
Mix the fuel and air evenly.
The process of introducing fuel into the cylinder is called carburization. While the tool that elakukan dinamakn carburetor.
The following will be explained one by one part of the carburetor and its functions:
Carburetor bowl (float chamber)
Serves as a temporary fuel storage before use.
Valve / needle buoy (floater valve)
Function set the entry of fuel into the carburetor bowl.Buoy (floater)
Function set the fuel to remain in the carburetor bowl.Skip / gas valve (throtle valve)
Function set the amount of gas into the cylinder.
Needle transmitter (main nozzle / needle jet)
Functioning to emit fuel motor time in the gas, the magnitude is governed by the lifting of the needle skepticism.Needle skep / gas needle (Needle jet)
Function set the fuel spray from the main nozzle at the time of the motor in the gas.
Major transmitters (main jet)
Functioning to emit fuel when the motor in full gas (high)
Small transmitter / stationer (slow jet)
Functioning emits fuel time lamsam / stationer.Gas screw / gas screw (trhottle screw)
Serves to adjust the position of the skep before the gas.
10.Air / air screw (air screw)
Function set the amount of air to be mixed with fuel,
- The coke valve (choke valve)
Functioning to close the outside of the outside that will enter the carburetor so gas becomes rich, used at start time.
The workings of the carburetor begin when the engine is turned on. When the engine is alive, the engine sucks the outside air into the carburetor. Because the air velocity entering the spuyer is small, the air pressure at the inlet surface is low. So the fuel that radiates through a small spuyer.mixture of fuel and air will produce gas that will be burned in the cylinder.