Some simple rules to clean camera lenses
Some simple rules to clean camera lenses
Many people use DSLR cameras to take pictures. Those who want good quality pictures take different types of pictures with multiple lenses. But you know, every time you change the lens, the camera sensor is likely to have a dust. Cleaning the camera in the life of any photographer is a very complex and time-consuming task. It is very important to keep the camera sensor clean. Otherwise all black images will be seen in the picture. So let us see how to clean the camera sensor.
It is best to go to professionals for cleaning the lens, but professional people may not be available in all areas, or it may be a matter of time. How to save time and money both by sitting in the house itself can easily clean the lens.
Lenses can be roughly dirty due to four factors,
The dust
There are always many small dust floating in the air. Since the camera has to get out of the air if you want to take a picture, then with so many tricks, you can not protect the lens from these dust. The slight amount of dust may not be seen in your eyes or even occasionally in the photo, but more dust can also damage your lens. These small dust can reduce the sharpness of your photo, and if there is a lot of dust inside the lens then there is also a problem in focus. To avoid these problems, first of all, you should filter the lens. Filters attach about 50 percent to the inside of the lens. And, of course, do not need to be in the camera when inserting the camera. However, if the dust goes inside the lens for unnecessary reasons then you can use the lens cleaning toolkit. These toolkits in the market are available at different prices starting from 500. These toolkets usually have a microphone cloth, soft brush, cleaning gel, air blower and so on. First, remove the filter from the lens, then blur the dusts with the air blower. Most of the dust will fly, but some large dust still stays on the lens. In this case, clean the dust by rotating round the clock with microfiber cloth with Toolkit. If any oily substance is in the lens then apply a little cleaning gear to the cloth. The oil, the grid, the fingerprint darts will be easily accessible by this.
Water
Like any other electronic device, the camera is very damaging to the lens. Most lenses have motor and electronic circuits that can be damaged by water or can cause malfunction very easily. So, in this case, what we have to do, first try to keep the lens away from the water as possible, unnecessarily free the camera lens in open weather. Use a quality waterproof casing or bag if you want to take pictures in the rain. After taking photos, keep the lens covered with a dry towel. Eventually, if the water inside the lens is inserted, take a silicone gel in an air-tight box and keep the lens in it as if there is silica gel around it. If you do not have silica gel, keep the lens in a cotton cloth and keep it in the drum at least 10 hours. In this way the rice will absorb the water slowly inside the lens. However, if you think the lens is water then contact the experts.